CO₂ vs O₂ Monitoring

What’s the difference between CO₂ and O₂ monitoring?

Completely different risks are being monitored with Carbon dioxide (CO₂) and oxygen (O₂) sensors. CO₂ sensors measure levels of carbon dioxide, which becomes toxic at raised levels, whilst oxygen sensors measure the percentage of oxygen in the air, recognising depletion or enrichment risks.

Using the wrong type of sensor can result in dangerous conditions going undetected.

Why this matters

CO₂ and O₂ monitoring are often confused, particularly in environments where multiple gases are present.

A common misconception is that an oxygen monitor can detect a CO₂ leak. This is incorrect.

CO₂ can reach dangerous and potentially fatal levels way before oxygen levels drop enough to trigger an O₂ alarm. Relying on the wrong type of monitor can lead to delayed warnings and serious safety risks.

What is CO₂ monitoring?

Carbon dioxide monitoring measures the concentration of CO₂ gas in the air.

CO₂ is:

  • colourless and odourless
  • naturally present at low levels (~0.04%)
  • hazardous at elevated concentrations

CO₂ monitoring is used to detect:

  • gas leaks
  • build-up in enclosed spaces
  • poor ventilation

At higher concentrations, CO₂ can cause:

  • dizziness
  • headaches
  • confusion
  • loss of consciousness

What is O₂ monitoring?

Oxygen monitoring measures the percentage of oxygen in the air.

Normal atmospheric oxygen levels are around 20.9%.

O₂ monitoring is used to detect:

  • oxygen depletion (leads to low oxygen levels)
  • oxygen enrichment (which causes an increased fire risk)

Oxygen depletion is often caused by gases such as:

  • carbon monoxide (CO)
  • carbon dioxide (CO₂)
  • nitrogen (NO)

Low oxygen levels, known as hypoxemia, can lead to:

  • impaired judgement
  • unconsciousness
  • asphyxiation

CO₂ vs O₂ monitoring: key differences

FeatureCO₂ MonitoringO₂ Monitoring
What it measuresCarbon dioxide concentrationOxygen percentage
Primary riskToxicityAsphyxiation or fire risk
Detection methodNDIR / infrared sensorsElectrochemical / paramagnetic sensors
Typical use casesBreweries, labs, beverage productionNitrogen storage, confined spaces
Can it detect the other gas?❌ No❌ No

Can an oxygen monitor detect CO₂ leaks?

No.

An oxygen monitor does not measure carbon dioxide levels.

In a carbon dioxide CO₂ leak:

  • CO₂ levels increase rapidly
  • oxygen levels decrease slowly

CO₂ levels may already be dangerously high, by the time oxygen levels have fallen enough to trigger the alarm (generally at 19.5%), which is why a CO₂ monitor is essential where carbon dioxide is used or stored.

Analox O2 Portable handheld oxygen monitor for checking oxygen levels in breathing cylinders

When do you need a CO₂ monitor?

You need a CO₂ monitor in environments where carbon dioxide is:

  • stored (gas cylinders, bar cellars)
  • produced (fermentation)
  • used in processes (drink carbonation, food packaging, welding, medical procedures

When do you need an O₂ monitor?

Oxygen monitoring is needed where gases may displace oxygen in the air.

Common applications for CO₂:

  • breweries and beverage production
  • restaurants and cellars
  • laboratories and medical facilities
  • indoor agriculture

Common applications for O₂:

  • nitrogen storage areas
  • confined spaces (cellars, armoured vehicles)
  • industrial gas storage
  • laboratories

When do you need both CO₂ and O₂ monitoring?

In many environments, both gases present risks.

Examples:

  • breweries (CO₂ + nitrogen)
  • laboratories (multiple gases)
  • food production facilities

In these cases, a dual gas monitoring solution is recommended to ensure full protection is provided.

brewery interior with ventilation system and seating area where CO2 monitoring is important

Where should sensors be installed?

CO₂ sensors:

  • low to the ground (CO₂ is more dense than air)
  • near potential leak sources

O₂ sensors:

  • at breathing height
  • in areas where gas displacement may occur

The correct placement of the sensors is essential for reliable and accurate gas detection.

Common safety mistakes

Some of the most frequent safety issues include:

  • using an oxygen monitor to detect CO₂
  • assuming CO₂ can be detected by smell
  • installing sensors in the wrong location
  • not monitoring multi-gas environments properly

These mistakes can result in delayed detection and increased risk.

red cross error icon symbol indicating mistake or incorrect action

Recommended monitoring approach

To ensure reliable safety selecting the right sensor for the environment and the gases which are involved, you must:

  • use CO₂ monitors for carbon dioxide risks
  • use O₂ monitors for oxygen depletion risks
  • use dual gas monitors where multiple gases are present

CO₂ Calculator

Many people believe an oxygen (O₂) monitor alone is enough to stay safe when using carbon dioxide (CO₂). In reality, CO₂ is a toxic gas, and dangerous levels can be reached long before O₂ alarms activate.

As CO₂ leaks into an area, it displaces oxygen. However, most O₂ monitors only alarm at around 19.5% O₂, by which point CO₂ concentrations may already be hazardous.

If your facility uses CO₂, a dedicated CO₂ monitor is essential. It provides earlier warning of leaks, helping protect people, reduce product loss, and minimise costly CO₂ waste.

Use this calculator to see how changing CO₂ levels affect the surrounding O₂ concentration.

Normal
Normal

SLOT Specified level of toxicity (1 - 5% of fatalities)

SLOD Significant likelihood of death (50% fatalities)

Learn more about our CO₂ monitoring solutions or explore our O₂ gas detection systems to find the right protection for your application.

FAQs

Can CO₂ be detected by smell?

No. Carbon dioxide is colourless and odourless.

What happens if CO₂ levels increase?

Raised CO₂ levels can cause dizziness, confusion and loss of consciousness.

What is a safe oxygen level?

Normal oxygen levels are around 20.9%. Levels below 19.5% are considered unsafe.

Can one monitor detect both CO₂ and O₂?

Only if it is specifically designed as a dual gas monitor and has both sensors.

Key takeaway

CO₂ and O₂ monitoring address different hazards and are not interchangeable.

Using the correct type of gas monitor, or a combination of both, is essential to ensure safe environments and protect against potentially life-threatening conditions.